37
EMP-S1 User’s GuideAdvanced Operation > Configuration Menus
Picture
Quality
Sync.g
(Computer images
only)
Adjusts the image when flickering, fuzziness or interference occur in the image.
Flickering and fuzziness may also occur when the brightness, contrast, sharpness or keystone correction
settings are adjusted.
Best results can be obtained by adjusting the tracking before the sync.
Color TemperaturegAdjusts bright colours from a reddish tinge to a bluish tinge.
Lower colour temperature settings produce redder colours and softer colour tones.
Higher colour temperature settings produce bluer colours and sharper colour tones.
Press the [e] button and make a setting from the colour adjustment menu which is displayed.
Saturation
(Video images only)
Adjusts the colour depth
Tint
(Video images only)
(Adjustment is only possible when Component Videog or NTSC signals are being input)
Adjusts the tint of the image.
Auto Setup
(Computer images only)
ON: When the input source is switched to a computer signal, the projector automatically adjusts the image
to its optimal state.
OFF: Auto Setup is disabled.
Input Signal
(Computer/component video
images only)
Select the type of image signal connected to the Computer/Component Video port.
• Computer: computer images
• Component Video (YCbCr): DVD images
• Component Video (YPbPr): HDTV images
Reset Resets all the adjustment values within the "Image" menu (except for "Input Signal") to their default
settings.
•Press the [e] button and select "Yes" on the confirmation screen which is displayed.
• Select "All Reset" to restore all menu settings, such as image and sound, to their default settings.
s"Reset menu" P.41
Sub menu Function