42
EMP-S1 User’s Guide
Troubleshooting
When You Suspect a Problem
First, check the indicators on the projector.
There are two indicators on the projector unit which notify you of projector conditions.

Power indicator

lit flashing •If the indicator is not lit, the power supply is not on.
Condition Cause/Remedy s
Orange Standby state
(Not abnormal)
The power cable should only be disconnected when the projector is in this state.
Press the [Power] button to start projection.
P.20
Orange Cool-down in progress
(Not abnormal)
• Please wait.
The cool-down period lasts about 20 seconds.
• You cannot operate the [Power] button during the cool-down period. Press the power button again after cool-
down has finished.
P.22
Green Projection in progress
(Not abnormal) P.20
Green Warming-up
(Not abnormal)
Please wait.
Warming up takes about 40 seconds. When warming up is complete, the indicator changes to steady green.
P.20
Power indicator
Warning indicator