59
EMP-S1 User’s GuideAppendices > Projector Care
fReplacing the air filter
Replacing the air filter can also be performed when the projector is
mounted to a ceiling.
ATurn off the projector power, wait for the cool-down
period to end, then disconnect the power cable.
Cool-down takes about 20 seconds.
BPut your finger into the recess in the air filter hook,
and lift up the air filter to remove it.
CReplace the air filter with a new one.
Take out the old air filter and install the new one. Please ensure there
are no gaps between the air filter and the plastic grill.
DReplace the air filter cover.
First insert the tabs, and then press down on the opposite side until it
clicks into place.
pDispose of used air filters properly in accordance with your
local regulations.