9
Basic Operations
Turning Off th e Projector
Follow the procedure below to turn off the power of the projector.
Procedure1
Turn off the power for the signal
sources that are connected to the
projector.
Check that the power for all connected
components has been tuned off.
2
Press the [Power] button on either the
remote control or the projector's
control panel.
The confirmation message shown left will appear.
If you do not wish to turn off the power, press any
other button.
If you do not press any button, the message will
disappear automatically after 7 seconds (the
power will not turn off).
3
Press the [Power] button once more.
The lamp unit will turn off and the indicator
will flash orange as the cool-down period
starts.
4
Check that the indicator has changed
to light orange.
When the indicator lights orange, cool-down is
complete.
The cool-down period lasts for approximately 2
minutes. (This varies depending on factors such
as the ambient air temperature.)
5
If not using the projector for long
periods of time, disconnect the power
plug from the electrical outlet.
The buttons on the projector’s control panel
and remote control cannot be operated
while the indicator is flashing orange.
Wait until it lights steadily.
Source
Power
Sync+
Trcking Trcking+
Menu Esc
Help
Computer/YCbCr
Video
t
Projector Remote control
Lights orange
Do not disconnect the power cord from the outlet while the indicator is still
flashing orange. If you disconnect the power cord while the indicator is still flashing,
it may result in errors in projector operation and reduce the lamp unit operating life.