49
Appendices
6
Install the lamp cover.
Insert the two cover tabs into the projector, and
then press the other side of the lamp cover until it
clicks into place.
The projector has a built-in counter which keeps track of the lamp operating time. When the cumulative
operating time reaches a certain point, it causes the replacement warning message to be displayed. Therefore,
the counter needs to be reset after the lamp has been replaced with a new one. You can do this using the
projector menu.
Procedure1
Press the [Menu] button on either the
remote control or the projector's
control panel.
The environment setting menu will be displayed.
2
Select Reset Lamp Timer from the
About menu.
Press the button on the projector's control
panel or the [Enter] button on the remote control.
3
Reset the lamp operating time.
Select Yes, and then press the button on the
projector's control panel or the [Enter] button on
the remote control.
•
••
•Install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a
safety precaution. Moreover, the lamp will not turn on if the lamp or the lamp cover is not
installed correctly.
•
••
•Spare lamps are provided with a spare air filter. The air filter should also be replaced when the
lamp is replaced.
•
••
•Dispose of used lamps properly in accordance with your local regulations.
Resetting the Lamp Operating TimeDo not reset the lamp operating time except after the lamp has b een re place d, othe rwise t he lam p
replacement period will not be indicate d correctly.
Sync+
Tracking - Tracking +
Sync-
Menu Esc
Computer/YCbCr
Video
Keystone
Shift
Auto
Source
Projector Remote control
Cleaning
Replacing Consumables