37
Troubleshooting
When Having Some Trouble

If you are having a problem with the projector, first check the projector's indicators.

The projector is provided with the following three indicators. These indicators alert you to problems with projector

operation.

The following tables show what the indicators mean and how to remedy problems that they indicate.

: lit : flashing : off

Indicator status Projector status Problem and remedy Reference
page
Internal problem Stop using the projector, disconnect the power cord from the
electrical outlet, and contact your dealer or the nearest address
provided at “International Warranty Conditions” in Safety
Instructions/ World-Wide Warranty Terms included in the
package.
Fan problem/Sensor
problem Stop using the projector, disconnect the power cord from the
electrical outlet, and contact your dealer or the nearest address
provided at “International Warranty Conditions” in Safety
Instructions/ World-Wide Warranty Terms included in the
package.
Lamp problem Replace the lamp with a new one.
When replacing the lamp, check that the lamp and the lamp cover
are securely installed. If the lamp or lamp cover is not securely
installed, the lamp will not turn on.
p.48
Lamp operating
error If the power cord plug is disconnected before the cool-down
had not completely finished before, this may happen the next
time you try to turn on the lamp.
Wait for about 2 minutes without operating the projector. After
about 2 minutes, the cooling fan will stop. When the cooling fan
stops, disconnect the power plug and then re-insert it. When the
power cord is plugged back in, the projector will return to its
previous state, so press the [Power] button on either the remote
control or the projector's control panel to turn it back on.
If the lamp operating error happens again when the power is
turned back on, remove the lamp and check if the lamp is broken.
If it is not broken, reinstall it. If it is broken, replace it. Then
press the [Power] button on either the remote control or the
projector's control panel.
If the indicators still show a problem, stop using the projector,
disconnect the power cord from the electrical outlet, and contact
your dealer or the nearest address provided at “International
Warranty Conditions” in Safety Instructions/ World-Wide
Warranty Terms included in the package.
p.48
Operation indicator
Lamp indicator
Temperature indicator
Red Red Red
Red Red
Red Red
Red Red