Epson EMP-TS10 P in P (Picture in Picture)

Useful functions when a computer is connected
32
This function lets you project computer images or component video images in the main screen, and a video
image (Video or S-Video) in a sub-screen.
The video image in the sub-screen can be set using the P in P command in the Setting menu. (p.24)
Procedure1
Connect all components, set the type of
sub-screen using the Setting menu, and
then press the [P in P] button on the
remote control.
The sub-screen will appear at the top-right of the
screen, and the operation guide will appear at the
bottom-left of the screen.
2
Tilt the [Enter] button on the remote
control to change the position of the sub-
screen.
3
Press the [E-Zoom] button on the
remote control to change the size of the
sub-screen.
P in P (Picture in Picture)
•
••
•The P in P function cannot be used if the refresh rate for the computer images is set to
interlaced.
•
••
•The P in P function cannot be used when TV (525i) component video images are being
projected.
•
••
•The size of the sub-screen can be changed to one of five different sizes. The following
values are the ratios for the vertical and horizontal lengths of the sub-screens to those of
the main screen when the lengths of the main screen sides are 1.
•
••
•When the [P in P] button is pressed, the initial sub-screen appears in size 2.
Size 1
Approx. 1/3.2 Approx. 1/2.8
Size 2 Approx. 1/2.5
Size 3 Approx. 1/2.3 Size 4 Size 5
Approx. 1/2.1