The adjustment saved. The "Memory:
The Cinema
The Cinema computer. A
settingsusing thefrom"Memory:a
are available, and If you have used settings using "Memory:
The following describes how to save
Adjust the desired settings that you
Select "Memory: Standard" from the
Select a memory name from MEMORY1
The status of a memory area is indicated by the as follows.
Green : Memory area is in use 
Grey : Memory If you select a memory area that is already in use and and the current settings will be saved in their place.
To erase all memory contents, select "Memory Reset" from the
You can press 
and select the desired memory name from the selection menu. have been saved using both the "Memory: Advance" and the "Memory: Standard" screen for selecting the "Memory: Standard" or "Memory: Advance" screen will be first displayed. Select the memory area where the settings that you would like to retrieve is
Memory settings that have been applied to images will be retained even when the projector's power is turned off. The same memory adjustment settings will be applied to images that are projected the next time the projector's power is turned on.
The aspect setting retrieved from memory may not be applied to the images if they are 16:9 images or if the input signal images have a particular resolution.
If "Memory: Advance" adjustment settings have been retrieved, you can return the
settings to the way they were before the "Memory: Advance" adjustment settings were retrieved. To do this, select "Last Memory" from the selection menu.
13