Preparation for Using Cinema Color Editor

Uninstalling Cinema Color Editor

If you no longer require Cinema Color Editor, uninstall it by following the procedure below.

Windows

From My Computer, open the Control Panel, double-click "Add or Remove Programs", select "Cinema Color Editor", and then click Add/Remove] (or [Change/Remove] for Windows XP).

Connecting to a Computer

Macintosh

Follow the instructions that are displayed on the screen until the following window is displayed.

Select Uninstall.

Click [Uninstall].

In order to use Cinema Color Editor to adjust the quality of images, connect the computer to the projector using a USB cable or an RS-232C cable.

l

•Use the "COM Port" command in the "Operation" sub-menu of the "Setting" menu to

select the port that is being used for the connection. Default setting: USB

p.19

•If the "Add New Hardware Wizard" window appears when a Windows computer is connected to the projector by means of a USB cable, click [Cancel]. Install the USB driver (EPSON Projector USB-Virtual COM Driver) before making the connection.

•A maximum of 127 projectors can be connected to a single computer using a USB port, and a maximum of 2 projectors can be connected to a single computer when using an RS-232C port.

Adjusting projected images using a computer

25