
Configuration Menu Functions
Startup Screen
This sets whether the |
| |
is displayed (ON) or not displayed (OFF). | ON | |
If you change the setting, the new setting will take effect after the power has been turned | ||
| ||
off and the |
| |
|
|
| Input Signal |
| Default setting |
|
|
|
|
|
|
| Video Signal |
|
|
|
| (Adjustment is only possible when composite video or | signals are being |
|
|
|
|
| ||
| input) |
|
|
|
| This sets the video signal format. If "Auto" is selected, the video signal format is set | Auto | ||
| automatically. If there is a lot of interference in the image, or if a problem such as no | |||
|
|
| ||
| image being projected occurs even though "Auto" has been selected, select the correct |
|
| |
| signal format. |
|
|
|
| Input A |
|
|
|
|
|
|
| |
| Change this setting depending on the type of signal that is being output from the video |
|
| |
| YCbCr | |||
| equipment that is connected to the [InputA] port. |
| ||
|
|
|
| |
| D4 |
|
|
|
|
|
|
| |
| Select "YCbCr" or "YPbPr " depending on the type of signal that is being output by |
|
| |
| YCbCr | |||
| the source that is connected to the [D4] port. |
| ||
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Language |
| Default setting |
|
| This sets the display language for messages and menus. |
|
|
|
|
| English | ||
|
|
| ||
|
|
| (Varies depending on | |
|
|
| country of purchase) | |
|
|
|
|
|
Reset
This returns all settings in the "Setting" menu to their default settings, except for the "Input Signal" and "Language" settings.
Configuration Menu
21