Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson EMP-TW520 Projection methods, the screen, Configuration menu, Installing the Projector, When projecting from a celling, When projecting from the side of

1 60

Download 60 pages, 3.08 Mb

Setting up

Projection methods

When projecting from directly in front

When projecting from the side of

the screen

	When projecting from a celling			* Even if projection will be from the screen
	When projecting from a celling			* Even if projection will be from the screen
				side, set up the screen and projector so that
				they are parallel.

*When suspending the projector from a ceiling,

change the configuration menu settings. p.33

Configuration menu

SettingsProjection

Front

Front/Ceiling

Avoid setting the projector up in a place which is very dusty or humid, or where there will be cigarette or other smoke, especially oily smoke.

TIP	Clean the air filter at least once every 3 months.
	Clean the air filter more frequently if using the projector in a dusty environment.

When installing against a wall, leave a space of 20 cm (7.9 in.) or more between the projector and the wall.

A special method of installation is required in order to suspend the projector from the ceiling. Please contact your dealer if you would like to use this installation method.

Installing the Projector

11

Contents

Page About the Manuals and Notations Used Checking the Components Documentation Table of Contents ■ Problem Solving ■ Maintenance ■ Optional Accessories / Consumables ■ List of Supported Monitor Displays ■ Specifications Features of the Projector Page Part Names and Functions Page • [InputA] port p.12 • [SCART] input port p.12 • [Trigger out] port • [Video] input port p.12 Appearance Setting up Lens shift adjustment Projection methods Connecting Image Sources Preparing the Remote Control Using the remote control Projecting Images When the expected images are not projected Turning the power off Adjusting the Projection Screen Correcting projector tilt Correcting keystone distortion (Keystone) Displaying a test pattern Basic Image Quality Adjustments Image Quality Adjustments Advanced Colour Adjustments Adjusting from the gamma correction values Customized ("Adjust it from the image") ("Adjust it from the graph") Offset Gain Hue Saturation Examining Image Quality Further Page Page Configuration Menu Functions Configuration Menu Color Mode*1 Input Adjustment *2 Color Saturation *2 Tint *2 Sharpness *2 Auto Iris *3 Aspect *1 Zoom Caption *1 Tracking *1 Sync.*1 Position *1 Advanced Auto Setup Keystone Operation User’s Logo Display Input Signal Projection Language Save Memory Load Memory Reset All Reset Lamp Hours Displaying a menu Selecting a menu item Changing settings Problem Solving warning/problem normal Problems relating to images ■No images appear Have you pressed the [Power] button Is the main power switch ■The message "Not Supported." is displayed ■The message "No Signal." is displayed ■Images are fuzzy or out of focus ■Interference or distortion appear in images ■Image is truncated (large) or small ■Image colours are not right ■Images appear dark ■Projection stops automatically Problems when projection starts ■ Power does not turn on Problems with the remote control ■The remote control does not work Maintenance Air filter replacement period Lamp replacement period Appendix Replacing the air filter Replacing the lamp Resetting the lamp operating time Page Optional Accessories / Consumables List of Supported Monitor Displays Analog-RGBsignals/signals input to the [HDMI] input port Specifications ■Angle of tilt ■RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page Page General Notice: