Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson EMP-TW520 ■Angle of tilt, ■RS-232Ccable layout

1 60

Download 60 pages, 3.08 Mb

Specifications

■Angle of tilt

If you set the projector higher than 15º, it could damage the projector and cause an accident.

■RS-232C cable layout

• Connector shape		: D-Sub 9-pin (male)
• Projector input connector		: RS-232C
<At projector>	<At computer>
		<At projector> (PC serial cable) <At computer>				Signal	Function
		GND	5	5	GND	GND	Signal wire earth
		RD	2	3	TD	TD	Transmit data
		TD	3	2	RD	RD	Receive data
		DTR	4	6	DSR	DSR	Data set ready
		DSR	6	4	DTR	DTR	Data terminal ready

Safety	EMC
USA	USA
UL60950 Third Edition	FCC Part 15B Class B (DoC)
Canada	Canada
CSA C22.2 No.60950	ICES-003 Class B
European Community
The Low Voltage Directive	European Community
(73/23/EEC)	The EMC Directive
IEC60950 3rd Edition	(89/336/EEC)
	EN55022 Class B
	EN55024
	IEC/EN61000-3-2
	IEC/EN61000-3-3
	Australia/New Zealand
	AS/NZS CISPR 22:2002 Class B

Contents

Page About the Manuals and Notations Used Checking the Components Documentation Table of Contents ■ Problem Solving ■ Maintenance ■ Optional Accessories / Consumables ■ List of Supported Monitor Displays ■ Specifications Features of the Projector Page Part Names and Functions Page • [InputA] port p.12 • [SCART] input port p.12 • [Trigger out] port • [Video] input port p.12 Appearance Setting up Lens shift adjustment Projection methods Connecting Image Sources Preparing the Remote Control Using the remote control Projecting Images When the expected images are not projected Turning the power off Adjusting the Projection Screen Correcting projector tilt Correcting keystone distortion (Keystone) Displaying a test pattern Basic Image Quality Adjustments Image Quality Adjustments Advanced Colour Adjustments Adjusting from the gamma correction values Customized ("Adjust it from the image") ("Adjust it from the graph") Offset Gain Hue Saturation Examining Image Quality Further Page Page Configuration Menu Functions Configuration Menu Color Mode*1 Input Adjustment *2 Color Saturation *2 Tint *2 Sharpness *2 Auto Iris *3 Aspect *1 Zoom Caption *1 Tracking *1 Sync.*1 Position *1 Advanced Auto Setup Keystone Operation User’s Logo Display Input Signal Projection Language Save Memory Load Memory Reset All Reset Lamp Hours Displaying a menu Selecting a menu item Changing settings Problem Solving warning/problem normal Problems relating to images ■No images appear Have you pressed the [Power] button Is the main power switch ■The message "Not Supported." is displayed ■The message "No Signal." is displayed ■Images are fuzzy or out of focus ■Interference or distortion appear in images ■Image is truncated (large) or small ■Image colours are not right ■Images appear dark ■Projection stops automatically Problems when projection starts ■ Power does not turn on Problems with the remote control ■The remote control does not work Maintenance Air filter replacement period Lamp replacement period Appendix Replacing the air filter Replacing the lamp Resetting the lamp operating time Page Optional Accessories / Consumables List of Supported Monitor Displays Analog-RGBsignals/signals input to the [HDMI] input port Specifications ■Angle of tilt ■RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page Page General Notice: