Epson EMP-TW520 Examining Image Quality Further

Examining Image Quality Further

In addition to colour adjustments, adjustments to advanced sharpness and the amount of light from the lamp can also be made to match the image in search of the best picture.

Sharpness (Advanced) adjustment

Press , and then select "Picture" - "Sharpness" - "Advanced".

Use or to select a menu

item, and use or to make adjustments.

Adjust the resolution and contrast of the image.

If "High-band Enhancement" is set in the + direction, hair and the detailed areas of clothing will be emphasized.

If "Low-band Enhancement" is set in the + direction, the areas emphasized by "High-band Enhancement" will be hardly emphasized. Instead, the rough areas of the entire subject, such as contour and background, will be emphasized, resulting in a sharp image.

(You can adjust "High-band Enhancement" and "Low-band Enhancement" at the same time by using the bar on the top in the screen.)

Press	to exit the menu.	Setting "H-Sharpness" / "V-Sharpness" to the +
		side will enhance the image sharpness in the

Sharpness (Advanced) adjustment

horizontal / vertical direction. Setting them to the -

side will give a soft image.

Auto Iris (automatic aperture) setting

Auto Iris (automatic aperture) setting

Press	, and then select "Picture"	The amount of light will be automatically adjusted
- "Auto Iris".		to the brightness of the image, creating a picture
		with depth and perspective.

Select "On".

Press to exit the menu.

Image Quality Adjustments

23

Contents

Page About the Manuals and Notations Used Checking the Components Documentation Table of Contents ■ Problem Solving ■ Maintenance ■ Optional Accessories / Consumables ■ List of Supported Monitor Displays ■ Specifications Features of the Projector Page Part Names and Functions Page • [InputA] port p.12 • [SCART] input port p.12 • [Trigger out] port • [Video] input port p.12 Appearance Setting up Lens shift adjustment Projection methods Connecting Image Sources Preparing the Remote Control Using the remote control Projecting Images When the expected images are not projected Turning the power off Adjusting the Projection Screen Correcting projector tilt Correcting keystone distortion (Keystone) Displaying a test pattern Basic Image Quality Adjustments Image Quality Adjustments Advanced Colour Adjustments Adjusting from the gamma correction values Customized ("Adjust it from the image") ("Adjust it from the graph") Offset Gain Hue Saturation Examining Image Quality Further Page Page Configuration Menu Functions Configuration Menu Color Mode*1 Input Adjustment *2 Color Saturation *2 Tint *2 Sharpness *2 Auto Iris *3 Aspect *1 Zoom Caption *1 Tracking *1 Sync.*1 Position *1 Advanced Auto Setup Keystone Operation User’s Logo Display Input Signal Projection Language Save Memory Load Memory Reset All Reset Lamp Hours Displaying a menu Selecting a menu item Changing settings Problem Solving warning/problem normal Problems relating to images ■No images appear Have you pressed the [Power] button Is the main power switch ■The message "Not Supported." is displayed ■The message "No Signal." is displayed ■Images are fuzzy or out of focus ■Interference or distortion appear in images ■Image is truncated (large) or small ■Image colours are not right ■Images appear dark ■Projection stops automatically Problems when projection starts ■ Power does not turn on Problems with the remote control ■The remote control does not work Maintenance Air filter replacement period Lamp replacement period Appendix Replacing the air filter Replacing the lamp Resetting the lamp operating time Page Optional Accessories / Consumables List of Supported Monitor Displays Analog-RGBsignals/signals input to the [HDMI] input port Specifications ■Angle of tilt ■RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page Page General Notice: