EPL-6000 LASER PRINTER

2.Locate the density control knob, which is in the front right comer inside the printer.

3. To make the print darker, turn the knob clockwise as shown below.

Note: Increasing the print density increases toner

 

consumption. if you increase the mint density, you need to

 

replace the toner cartridge more frequently.

j

4. To make the print lighter, turn the knob counterclockwise.

1 Font and Status Print Tests 1

The font print test

1.To perform the font print test, press the RESET/CONTINUE and the SPECIAL buttons at the same time.

2.When you release the buttons, FONT PRINT appears on the display and the printer outputs a font print test.

A portion of the font print test printout is shown below.

Status print test

The status print test gives you information on current printer settings, such as paper size, number of copies selected, and font source and number.

Follow the steps below to perform the status print test:

1. Be sure that your printer is plugged in and the power is on.

2Be sure that your printer is off line. (OFF LINE appears on your display.) If not, press the ON LINE button to set the printer off Tine.

3.Press the A and V buttons at the same time.

4.When you release the buttons, STATUS PRINT appears on the display and the printer outputs the status print test.

A portion of the printout is shown below.

1 Error Messages 1

Notes:

•When a problem has been corrected, you may need to press the ON LINE button to resume printing.

•Certain problem require that you press the RESET/CONTINUE button to continue printing. However, when the AUTO CONT SelecType option is set to ON, the printer automatically clears the error and resumes printing for the following error messages:

PS CHANGE

ERROR 21

ERROR 40

ERROR 20

ERROR 22

 

When the AUTO CONT SelecType option is set to ON, your printer resumes priming even though the problem may not have been fixed. This may cause a problem with your printed output.

CHANGE DRUM

The drum unit may not be installed properly. Open the printer and make sure the drum unit is seated properly in the basket. (Press down simultaneously on the drum unit’s two green handles to make sure the unit has clicked into place.)

Also, the drum replacement cartridge may not be installed. Be sure to install a new drum replacement cartridge each time you replace the drum unit.

EPL-6

7 / 1 8 / 8 9

Laser Printers