Installing EZ-SCSI Software

If you are running Windows NT, you do not need to install EZ-SCSI software. Skip to the “Installing Adobe Photoshop” procedure.

Follow these steps to install the Adaptec EZ-SCSI software:1.Start Windows.2.Insert the Adaptec EZ-SCSI Disk 1 in a diskette drive.

3.From the Program Manager, open the File menu and choose Run. The Run dialog box appears.

4.Type A:SETUP (or B:SETUP if you inserted the disk in drive B) and choose OK. After a few moments, the initial EZ-SCSI screen appears.

5.Choose Install Adaptec EZ-SCSIto begin the installation. A screen appears, identifying the SCSI interface card you installed. Choose Continue.

6.The next screen identifies the scanner. Choose Continue.

7.The Installation Subdirectory screen appears, prompting you for a directory for the EZ-SCSI program files. Choose Install to accept the default directory.

8.Follow the instructions as they appear on the screen, choosing OK to accept the EZ-SCSI default settings.

Adaptec EZ-SCSI software modifies the CONFIG.SYS file and saves a backup of the original in CONFIG.BAK.

9.When the Installation Complete dialog box appears, choose Reboot System to restart the computer.

8