Connecting the Scanner to the Computer

Use this procedure to connect the scanner directly to the SCSI port on your computer using the cable included in the scanner package.

If you are already using the SCSI port on your computer for another SCSI device, such as an external hard drive, see Chapter 1 of the ES-1200C User’s Guide for information on including the scanner in a daisy-chain arrangement.

Caution:

Be sure that your computer, scanner, and any other peripheral devices are turned off before you plug in the cables.

1.Connect the 50-pin end of the cable to either the top or bottom SCSI connector of the scanner; then fasten the connector with the clamps on the sides of the connector, as shown.

2.Plug the other end of the interface cable into the connector of the SCSI interface card you installed in the computer. Fasten the connector with the wire clamps.