Installing the Interface Card

Use this procedure to install a SCSI interface card. For more detailed installation instructions, see the manual that came with your card.

1.Turn off the computer and any peripheral devices.

2.Disconnect the computer’s power cable from the electrical outlet and from the back panel. Also, disconnect any cables that are connected to the computer, including the keyboard cable.

3.Remove the cover from your computer. If you need detailed instructions, see your computer manual.

4.Before you touch any of the computer’s internal components, touch an unpainted metal surface inside the computer’s case to discharge any built-up static electricity.

5.Choose an option slot for the interface card. You can install the card in any available slot.

6.Remove any retaining screws from the option slot cover and remove the slot cover. Keep the screw or screws to secure the option card to the computer. Store the slot cover in a safe place in case you later remove the interface card.

7.Unpack the interface card. When handling the card, be careful not to touch any of the components on the circuit board or the gold-edged connector.

8.Insert the card into the slot, guiding it straight down. Push the card down firmly (but carefully) to insert it fully. You should feel the card fit into place.

9.Secure the end of the card to the back of the computer with the retaining screw or screws.