If your video source has component video connectors, you can use them to project a higher quality video image. You’ll need a component video cable and the VGA component adapter included with your projector.
Before starting, make sure the projector and your DVD player or other video device are turned off.
1. Connect the large end of the VGA component adapter to the projector’s Computer (Component Video) port.
VGA component
adapter
Connect VGA component adapter
2.Connect the component video cable to the VGA component adapter.
3.Insert the three ends of the component video cable into the R, G, and B ports on your video source.
4.To play sound through the projector, follow the instructions beginning on page 29.
If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 32 for instructions.
If more than one device is connected to your projector, select Computer (Component Video) as the source by pressing the Source Search button on the projector or the remote control. See page 34.
28Setting Up the Projector