Adjusting the Image

Once you see your image, you’ll need to make certain adjustments:

To focus or zoom your image, see below.

If the image is too high or too low, you can reposition it. See page 38.

If the image isn’t square, see page 38.

To adjust image brightness, see page 39.

If a computer image displays incorrectly, see page 40.

To change the color mode for your image and surroundings, see page 44.

You can make many other adjustments to the image—such as changing the brightness, contrast, and aspect ratio—using the projector’s menu system. See Chapter 4 for more information.

Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image, and the zoom ring to reduce or enlarge the image.

Focus

Zoom

You can also change the image size by moving the projector closer to or farther away from the screen. You can use the E-Zoombuttons on the remote control to zoom in on a portion of the image. See page 47 for instructions.

Projecting 37