Connecting the Power Cord
When you finish connecting all of your peripheral devices, connect the computer’s power cord to the power inlet.
Then plug the other end of the cord into the electrical outlet. Be sure to read the next section before you turn on the computer.
Turning On the Computer
Before you turn on your system, read the following safety rules to avoid damaging your computer or injuring yourself:
DDo not connect or disconnect any power or peripheral device cables when the computer’s power is on.
CI Never turn on the computer when its cover is off.
Ct Never turn off or reset your computer while a disk drive access light is on. This can destroy data stored on the disk.
CI Always wait at least five seconds after you turn off the power before you turn it on again. This prevents possible damage to the computer’s electrical circuitry.
Ct Do not leave a beverage near your system or any of its components. Spilled liquid can damage the circuitry of your equipment.
Setup Guide 13