tl Always turn off the power, disconnect the computer’s power cord, and wait 30 seconds before you remove the cover. Only remove the cover to access internal components.
0Never press the computer’s power or reset buttons when the cover is off.
Now you are ready to turn on your system. Press the power button on the computer’s front panel. You may need to adjust your monitor’s brightness and contrast to get the best display. Then read the next section for guidelines on running the appropriate configuration program and installing software.
Configuring Your System
There are two programs you can use to configure your computer: the BIOS SETUP program and the System Configuration utility. Which one you use depends on the option cards you may have installed in your computer.
You should use the BIOS SETUP program to configure your computer in the following situations:
tl You did not install any option cards
QYou installed an ISA option card that did not come with a configuration (CFG) file.
You should run the System Configuration utility to configure your system if either of the following is true:
Ll You have installed an EISA option card
tl You have installed an ISA card that came with a CFG file.
14 Setup Guide