❏If you plan to use a printer stand, follow these guidelines:
- Use a stand that can support at least twice the weight of the printer.
- Never use a stand that tilts the printer. The printer should always be kept level.
- Position your printer’s power cord and interface cable so they do not interfere with paper
feeding. If possible, secure the cables to a leg of the printer stand.
When maintaining the printer
❏Unplug the printer before cleaning it, and always clean it with a damp cloth only.
❏Do not spill liquid onto the printer.
❏Do not attempt to service the printer yourself except as specifically explained in this manual.
❏Unplug the printer and refer servicing to qualified service personnel under the following
conditions:
i. If the power cord or plug is damaged.
ii. If liquid has entered the printer.
iii. If the printer has been dropped or the cabinet damaged.
iv. If the printer does not operate normally or exhibits a distinct change in performance.
❏Do not use aerosol blowers which contain flammable gas inside or around this product. Doing so
may cause fire.
❏Adjust only those controls that are covered in this manual.
When handling paper
Do not load paper that is curled or has been folded.
When operating the printer
❏Adjust only those controls that are covered in the user documentation. Improper adjustment of
other controls may result in damage requiring extensive repair by a qualified technician.
❏When the printer encounter difficulties, turn off the printer, and then unplug the power cord from
the electrical outlet.
When handling ink cartridges
Observe the following when handling ink cartridges:
❏Keep ink cartridges out of the reach of children and do not drink the ink.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Safety Instructions 10