1. After printing is finished and the printer advances the paper to the tear-off position, tear off all
printed pages while holding the paper.
* perforation
Note:
The time until the paper begins to advance to the tear-off position after printing is finished can be set.
To change the settings, see “Setting the Auto Tear-Off Function” on page 35.
2. When you resume printing, the printer feeds the paper back to the top-of-form position and
begins printing.
Removing continuous paper
Follow these steps to remove continuous paper from the printer.
1. After printing is finished and the printer advances the paper to the tear-off position, tear off all
printed pages.
2. Press the Tear Off button to feed the paper backward to the top-of-form position.
3. Press the Load/Eject button to feed the paper backward out of the printer to the standby position.
Note:
Do not feed the paper backward 558.8 mm (22 inches) or more using the Load/Eject button. Doing
so may cause paper jams.
4. To completely remove the paper from the printer, open the sprocket covers. Remove the paper
from the tractor unit, and then close the sprocket covers.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Paper Handling 21