Panel light state Beep pattern Problem
Solution
N On
N K B
N Y B*
N M B*
N C B*
OThe ink cartridge has reached its replacement time.
Replace the ink cartridge. For more information, see “Replacing an
ink cartridge” on page 75.
OThe ink cartridge is not installed.
Install the ink cartridge. For more information, see “Replacing an ink
cartridge” on page 75.
N On
F K B
F Y B*
F M B*
F C B*
-Ink is low.
Obtain a replacement ink cartridge.
F On
F Cover
F K B, F Y B, F M B, F C B
**
F K B, F K B ***
O O O O OA product maintenance error has occurred.
Contact a qualified service person.
F On
F Cover
F Paper
F Tear Off
F Pause
O O O O OA fatal error has occurred.
Turn off the printer and check for a paper jam. If there is a paper jam,
remove the jammed paper, and then turn on the printer.
If the scale is dirty, clean it with a soft cloth. See “Cleaning the Printer”
on page 103.
If the problem persists, turn off the printer, wait several minutes, and
then turn it on again.
* The status of the right black ink light is shown for the GP-M830/GP-M831/GP-M832.
** All of the ink lights flash at the same time (GP-C830/GP-C831/GP-C832).
*** Both of the ink lights flash at the same time (GP-M830/GP-M831/GP-M832).
N = on, F = flashing
O = Ten long beeps
O O O O O = Five sets of five short beeps (twenty-five beeps)
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Troubleshooting 56