1-6 Setting Up the Scanner
Paprika-U
Rev. C
A5 size CHAP1.FM
10/28/98 Pass 0
LProof Sign-off:
M. Fujimori _______
<leadername> _______
<editorname> _______
Installing a SCSI Interface Board (Windows Only)
Unless your PC already has a SCSI board installed, you need to
install a SCSI board and SCSI software before installing the
scanner driver and software applications.
If you have a Macintosh or if you already have a SCSI board
installed in your PC, go to the next section.
Note:
For additional information, see the installation guide that comes with
your SCSI board.
1. Turn off the computer and any peripheral devices. Unplug
any power cords, then disconnec t all cables from the back
panel of your computer.
2. Remove the cover from your computer.
wCaution:
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your computer before handling the interface boar d or any of
the computer’s circuit boards.
3. Insert the interface board into an appropriate ex pansi on sl ot,
then secure it with the retaining scre w .
4. Replace the computer cover and reconnect all cables.