4
Maintenance and Troubleshooting 4-11
Paprika-U
Rev. C
A5 size CHAP4.FM
10/28/98 Pass 0
R
Proof Sign-off:
<tantoname> _______
<leadername> _______
<editorname> _______
The operate light does not come on.
Press the
Poperate button to turn on the scanner.
Make sure the power cord is correc tl y plugged into the scanner
and the power outlet.
The scanner does not start scanning.
Make sure that the operate light is green (in ready state).
Make sure that you have selecte d the correct interface port and
settings with your software. Also make sure the interface board
in your computer is properly installed.
Make sure that the terminator and S CSI ID are correctly set up.
See page 1-12.
If you have other expansion boards in your c omputer, make sure
that they are not interfering with the in terrupt setting of the
interface board for your scanner. (See your computer
documentation.)
The scanner software does not work properly.
Be sure you have correctly installed your soft wa re.
Make sure that your computer system meets the requirements,
such as the operating system versi on, spec ified f or your sof tware.
Confirm that the computer has enough memory for your
software. If your computer ha s many device drivers, or if you are
running other software at the same ti me, or using RAM-resident
programs, the compu ter may not ha ve en ough mem ory av ailabl e.
(See your software and computer documentation.)