Epson LQ-1010 ESC K, ESC L, ESC Y, Graphics, 9-38Command Summary, Select Single-densityGraphics Mode, Select Double-densityGraphics Mode

Commands Arranged by Topic

Graphics

See Chapter 4 for sample graphics programs. See the table under ESC * for density information on graphics modes.

ESC K			Select Single-density Graphics Mode
Format:
ASCII code:	ESC	K	n1	n2
Decimal:	27	75	n1	n2
Hexadecimal :	1B	4B	n1	n2

Comments:

Turns on 8-pin, single-density graphics mode. The total number of columns = n1 + (n2 x 256).

ESC L			Select Double-density Graphics Mode
Format:
ASCII code:	ESC	L	n1	n2
Decimal:	27	76	n1	n2
Hexadecimal:	1B	4C	n1	n2

Comments:

Turns on 8-pin, low-speed, double-density graphics mode. The total number of columns = n1 + (n2 x 256).

ESC Y	Select High-speed Double-density Graphics Mode
Format :
ASCII code:	ESC	Y	n1	n2
Decimal:	27	89	n1	n2
Hexadecimal:	1B	59	n1	n2

Comments:

Turns on &pin, high-speed, double-density graphics mode. The total number of columns = n1 + (n2 x 256).

9-38 Command Summary