Epson LQ-1010 DIP switch settings

Character Tables

	ASCII			Dec.	Hex.	Description		Pg
	ESC 1		116		7 4	Select Character Tables	9-34
	ESC 4		52		34	Select Italic Mode	9-34
	ESC 5		53		35	Cancel Italic Mode	9-35
	ESC R		82		5 2	Select an International Character Set	9-35
User-defined		Characters
	ASCII			Dec.	Hex.	Description		pg
	ESC &.	38			26	Define User-defined Characters	9-36
	ESC :	58			3A	Copy ROM to RAM	9-36
	ESC %	37			25	Select User-deflned Set	9-37
	ESC 6	54			36	Enable Printable Characters	9-37
	ESC 7	55			37	Enable Upper Control Codes	9-37
	Graphics
	ASCII			Dec.	Hex.	Description		pg
	ESC K			75	4B	Select Single-density Graphics Mode		9-38
	ESC L			76	4C	Select Double-density Graphics Mode		9-38
	ESC Y			89	59	Select High-speed Double-density		9-38
	ESC Z			90	5A	Select Quadruple-denslty Graphics		9-39
	ESC’			42	2A	Select Graphics Mode		9-39
	ESC 7			63	3F	Reassign Graphics Mode		9-40

DIP switch settings

DIP Switch 1

	SW	Description				ON	OFF
1-1		lnternational character set				See page 3-8
1-2
1-4		Font	selection			See page 3-8
1-5
1.6		Condensed mode on/off				Condensed	Normal
1-7		Character table				Graphics	ltalics
1-6		Cut sheet feeder mode on/off				On	Off
DIP Switch 2
	SW	Description				ON	OFF
	2-1	Page	length			12 inches	11 inches
	2-2	Tear-off mode				On	Off
	2-3	1-inch skip over perforation				On	Off
	2-4	Auto	line	feed		On	Off
2-5		Input	buffer capacity			8 KB	1 KB
	2-6	Not used
	2-7	Character		spacing		See page 3-a
	2-a
	'Required for	use	of user-defined (download)		characters.