Installing ACDSeeTM

When installing ACDSeeTM, recorded images can be viewed on your PC.

zTurn on your PC.

xSet the CD-ROM in the CD-ROM drive.

cDouble click [My Computer].

memo

Although images can be viewed and printed, image data is in the CF card of the camera. To save the image data in the CF card to another medium, refer to the instruction manual of your PC and move or copy files using Explorer, etc.

You can edit images on your PC after moving or copying files there.

vDouble click the [CD-ROM drive] icon.

Viewing images on your PC

bDouble click [English].

nDouble click [setup.exe].

The Setup screen will appear. Follow the on-screen guidance and enter the registration information. When the installation is completed, restart Windows.

Connecting the camera and PC

zTurn on your PC.

memo

zDouble click the [ACDSeeTM] icon on the desktop.

xSelect the image to view.

Camera images can be found in [My Computer] ➝ [Removable Disk] ➝ [Dcim] ➝ [xxxpentx] (xxx is a 3-digit numeral) folder.

You can also view movie pictures operating the above procedures.

xTurn the camera off and connect the PC and camera using an USB cable.

Disconnecting the camera from your PC

Playback/Erasing

cTurn on the camera. The camera will be detected as [Removable Disk] in [My Computer].

memo

zDouble click (Hot Plug icon) on the lower right task bar tray of the desktop.

The [Remove Hardware] screen will appear.

xMake sure [USB Device] is selected and click [Stop]. [Stop Hardware Device] screen will appear.

cMake sure [USB Device] is selected and click [OK]. A message will appear.

vClick [OK].

bDisconnect the USB cable from your PC and camera.

For Windows 98/Me, there is no Hot Plug icon. When removing the camera, turn off the camera and disconnect the USB cable.

Playback/Erasing

66

67