You see the Date and Time Settings screen:

Date and Time Settings

 

Year:

Month:

Day:

2003

01

01

Hour:

Minute:

Format:

12

00

YYYY.MM.DD

Use the up or down button to select the year. Press OK to apply the setting.

2Press u or d on the arrow button to change the value for the selected item (such as the year).

3To go to the next option (Month or Day, for example) press l or r. Then use u and d to change that setting.

4After you finish making all settings, press the OK button. You see the Main Menu (described on page 21).

Note:

If you remove the P-1000’s battery, the date and time settings will be erased after about two days; so you’ll need to check and possibly change the settings. You’ll also need to check the date and time after replacing the battery to make sure they are set correctly. See “Setting the Date and Time” on page 49 for details.

Turning Off the Power

Before you turn off the P-1000, make sure the ACCESS light is off. Then slide the power switch as shown below, and hold it down for about 2 seconds until the power is turned off.

Getting Started 17