Selecting the Video Out Signal

If you have connected an external monitor (as described on page 19), you may need to change the video output signal method. When you select Video Out, you see this screen:

Choose NTSC or PAL. (Televisions sold for the North American market are NTSC.) If you change the setting while a device is connected, disconnect and reconnect the Video cable.

Setting the Date and Time

Select Date and Time to change these settings:

Date and Time Settings

 

Year:

Month:

Day:

2003

01

01

Hour:

Minute:

Format:

12

00

YYYY.MM.DD

Use the up or down button to select the year. Press OK to apply the setting.

Press u or d on the arrow button to change the value for the selected item (such as the year).

To go to the next option (Month or Day, for example) press

lor r. Then press u or d to change that setting.

After you finish making all settings, press the OK button.

Note:

If you remove the P-1000’s battery, the date and time settings will be erased after about two days; so you’ll need to check and possibly change the settings. You’ll also need to check the date and time after changing the battery to make sure they are set correctly.

Customizing Settings 49