Inserting and Removing a Memory Card
To insert a memory card, make sure it is facing up, and slide it in until it is securely seated in the slot.
Make sure the card is face up
Note:
The eject button may not pop out when you insert the card.
If you are using a CompactFlash adapter, put the card into the adapter and insert the adapter into the slot.
Caution:
Avoid using or storing the card in direct sunlight, or in places that are extremely hot, humid, or dusty.
When you are ready to remove a memory card, make sure the ACCESS light is off. Then push the eject button and pull out the card. If the button is not sticking out, press it once to pop it out, and then press it again to eject the card.
Caution:
Never remove a memory card while the ACCESS light is on; this can damage or erase data on the card or HDD.
Note:
If you are using a memory card in a CompactFlash adapter, remove the adapter from the
Getting Started 18