12
R4C706
short.bk Rev. E
ROLL.FM A5 size
5/24/01
LProof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Using Roll Paper

Using the Roll Paper Holder

With the roll paper holder mounted on the printer, you can print
in roll paper format, which is convenient for banner printing.
When you are printing using the roll paper holder, keep the
following in mind:
Load the paper printable side up.
Use flat, undamaged paper. If the paper is curled, flatten it
before loading to avoid paper feeding problems.
Always handle the paper by the edges.
Provide ample space in front of the printer for the paper to
eject fully.
Make sure that the output tray is down and the output tray
extension is closed.
Check that the end of the paper is cut cleanly, perpendicular
to the long axis of the paper. If it is cut on a diagonal or not
cleanly, the paper may not feed smoothly or the print may
extend off the edge of the paper.
EPSON recommends using media distributed by EPSON to
ensure high-quality results.

Loading the roll paper

Follow the directions below to mount the roll paper holder and
load the following types of roll paper.