84
R4C706
short.bk Rev. E
TRBLE.FM A5 size
5/24/01
LProof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Error light is flashing or on
Try one or more of these solutions:
If the
berror light is on and paper is jammed in the printer,
remove the paper from the printer.
If the
berror light is on and no paper is loaded, load more
paper in the sheet feeder.
If the
berror light is flashing, ink is low. Obtain a
replacement cartridge of the appropriate type. To determine
which cartridge is low, see “Replacing an In k Cartridge” on
page 61.
If the
berror light is on and ink is out, replace the
appropriate ink cartridge. To dete rmine which ink cartridge
is empty, see “Replacing an Ink Cartridge” on page 61.
Error light is on and the Processing light is flashing
Follow the steps below.
1. Press the
bmaintenance button, then remove any pa per in
the printer.
2. Turn the printer off. Check for and remove any foreign objects
or pieces of paper from inside the printer. Al so, make sure
that there is sufficient space around the vent on the back of
the printer to allow proper ventilation. Remov e any objects
blocking the vent, then turn the printer back on .
Note:
If you cannot remove a foreign object easily by yourself, do not use
force and do not disassemble the printer. Call your dealer for
assistance.
3. If the error does not clear, contact your dealer.