76
R4C706
short.bk Rev. E
TRBLE.FM A5 size
5/24/01
LProof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Vertical misalignment or banding
Try one or more of these solutions:
❏Make sure that the printable side of the paper is face up in the
sheet feeder.
❏Run the Head Cleaning utility to clear any clogged ink
nozzles. See “Cleaning the Print Head” on page 67.
❏Make sure that the Media Type settin g selected in the Control
Panel is appropriate for the type of media loaded in the
printer.
❏Make sure that the position of the adjust lever is appropriate
for the media type. When printing on media of normal
thickness, set the adjust lever to the “0” position. When
printing on envelopes or thick media, set the position to “+”.
Color gaps
Try one or more of these solutions:
❏Make sure that your paper is not d amaged, dirty, or too old.
Also, make sure that the printable side of the paper is face up
in the sheet feeder.
❏Run the Head Cleaning utility to clear any clogged ink
nozzles. See “Cleaning the Print Head” on page 67.
❏Check the
berror light. If the light is flashing, replace the
appropriate ink cartridge. See “Replacing an Ink Cartridge”
on page 61.
❏Make sure that the Media Type settin g selected in the Control
Panel is appropriate for the type of media that is loaded in the
printer.