12.When done making your settings, highlight the OK button at the top of the screen, then press Enter. Highlight the OK button again and press Enter to return to the main EasyMP Network Screen.

Understanding the Notification Messages

If a projector experiences a problem, it sends an e-mail message to each of the addresses you provided using EMP NetworkManager. The message includes the heading “EPSON Projector” in the subject line.

The body of the message contains:

the name of the projector

the projector’s IP address

a description of the problem

The problem descriptions are similar to the errors reported by EMP Monitor:

Internal problem

Fan-related problem

Sensor problem

Lamp timer failure

Lamp burned out

Lamp cover open

Overheating (projection turned off automatically)

High-speed cooling in progress (the projector is getting too hot but continues to operate)

Lamp replacement notification (the lamp is nearing the end of its life)

If a plus (+) sign appears before the description, it indicates that a problem has occurred. A minus (–) sign appears when the problem goes away or is resolved.

note

If a projector develops a critical problem, it may not be possible for it to report the error.

25