The first time you start NS Connection in Windows, you see a window asking you to select your network.
2.Select the IP address for your computer’s network adapter card and click OK.
You see the screen below. (If you have previously started NS Connection, or you’re using a Macintosh, this is the first screen you see.)
note
If you don’t see your network adapter’s IP address, allow a minute for it to appear. If your access point uses DHCP, sometimes it takes a minute for the server to pick up the IP address.
Select projector
This box indicates projector status
If the connection is working properly, you see your projector listed. If you have additional EPSON projectors on the network, they are also listed, along with their status.
note
If you don’t see the Switch network window and you want to change to a different network adapter, click the Extension button. In Windows, click Switch LAN. On Macintosh, click Set up network.
7