note
If you see a message during installation that the EPSON GDI Monitor Driver has not passed Windows Logo testing, click Continue Anyway.
■For optimal performance, set your screen resolution to 1024 ⋅ 768 or lower with a color depth of Thousands
(16 bit).
■When making Location settings, you can select the desired location and change all the network settings one at a time.
4.Make sure the following is displayed in the communication status bar in the top right corner of the screen:
■If the projector has been assigned an ESSID name, click the communication status icon and select the projector’s ESSID name from the menu.
■If you are using the wired LAN Connection mode, click Turn AirPort Off.
Using EMP NS Connect for Wireless Projecting
Your projector now includes version 1.20 of EMP NS Connection for Windows (equivalent to version 1.0 for Macintosh). If you are using a Macintosh, the screens will look different from those shown in this section, but the same features are available.
Follow the instructions in your Projector User’s Guide to install the software, start EasyMP, and set up your projector and computer in either Ad Hoc mode (computer to computer) or Access Point mode. Then follow these steps:
1.Make sure you’ve installed your wireless 802.11b card. Then do one of the following:
■Windows: select EMP NS Connection from the Start menu.
■Macintosh:
6