Take PictureMate With You
PictureMate’s handle makes it easy to carry short distances. If you have the optional battery, you can use PictureMate just about anywhere, even if an electrical outlet is not available.
Tip: You can order an optional PictureMate Carrying Case (part number PMBAG06) from Epson. See page 68 for details.
Packing Your PictureMate
If PictureMate is going to travel a longer distance, pack it carefully to help protect it from getting damaged.
Caution: Keep PictureMate out of the sun and don’t leave it in your car or other location where it can get too hot or too cold. PictureMate may be damaged or ink may leak.
1Remove the CD if you have one in the CD drive (PictureMate Zoom only).
2Press the 
On button to turn PictureMate off.
3Wait until the On light goes out, then unplug the power cable from the power outlet.
4Remove all paper and printed photos.
5Lower the screen, then close the paper support and output tray.
6Unplug the power adapter and any connected USB cable or device. Place the power cable and adapter in the PictureMate accessory box.
7Pack PictureMate in the box that it came in or the optional carrying case.
Caution: Make sure the photo cartridge is installed. Do not remove the photo cartridge before transporting. Don’t place PictureMate on its side or upside down, or ink may leak.
Note: If your prints don’t look as good after PictureMate has been moved, try aligning the print head (see page 62).
53