The power light flashes during charging when PictureMate is off. It takes about 2 hours to fully charge the battery when PictureMate is off. It takes longer when you use PictureMate while it is charging. The power light turns off when the battery is fully charged (if PictureMate is turned off).
The following battery status icons appear in the upper right corner of the photo viewer screen:
Flashing | Charging | Green | Low |
Green | Fully charged | Red | Very low |
Green | Sufficient power | White | Almost out |
Note: If you are running PictureMate with the battery, the printer turns off automatically after 15 minutes if it is not being used (unless PictureMate is connected to a computer and a memory
card is inserted). Press the 
On button to turn it back on.
Removing the Battery
If there is a problem with your battery, or you want to replace it with one that is already charged, you need to remove the battery.
1Make sure PictureMate is turned off.
2Release the latch and remove the battery.
3Replace the battery cover.
55