You see the following screen:

note

 

 

To enter numbers with the

 

 

remote control, hold the

 

 

Num button and use the

 

 

numeric keypad. Press the

 

 

Num button again to exit

 

 

numeric keypad mode.

6. For Mail Notification Settings, select ON and press Enter.

 

 

7. Highlight the IP address of SMTP server box and press Enter.

 

The box turns yellow to indicate you are in input mode. You can

 

enter numbers between 0 and 255. However, you cannot use the

 

following IP addresses: 255.255.255.255, 224.0.0.0, or 127.x.x.x

 

(where x is a number between 0 and 255).

 

8. Highlight the Port Number box and press Enter. Then enter the

 

SMTP server port number. The default value is 25, but you can

 

enter numbers between 1 and 65535.

 

9. Highlight the Destination address 1 box and press Enter. Enter

 

the e-mail address for the first computer that you want to receive

 

e-mail alerts. You can enter a maximum of 53 single-byte

 

alphanumeric characters.

 

Use the

pointer button on the remote control to enter letters.

Press the top of the button to scroll through capital letters, and the bottom of the button to scroll through lowercase letters. You will also see punctuation marks, such as a period (.) and symbols, such as @. When you see the letter or symbol you want, press Enter. Then press the right side of the button to move to the next position. To correct a mistake, press the left side of the button to return to the previous position.

130Managing Projectors