note

If you want to enter a blank space, use the space character that comes before the capital letter A.

If you want to enter numbers, use the numeric keypad while holding down the Num button on the remote control. Press the Num button again to exit numeric keypad mode.

For 64 bit WEP encryption with hexadecimal input, enter 10 characters, from 0 to 9 and from A to F.

For 128 bit WEP encryption with ASCII or text input, enter 13 alphanumeric characters.

For 64 bit WEP encryption with ASCII or text input, enter 5 alphanumeric characters.

6.When you’re done making settings, highlight the OK button at the top of the screen and press Enter.

Adding WPA Security

When you click the Security button on the Network screen, you see this screen:

1.Highlight WPA and press Enter.

2.Highlight the PSK (pre-shared key) text box and press Enter. The text box turns yellow to indicate you are in input mode. Press the pointer button up to select individual letters in alphabetical order, or down to select letters in reverse order; then press the pointer button to the right to move to the next character position. When done typing the key, press Enter.

72Presenting Through a Wireless Network