124Maintaining and Transporting the Printer
Preparing the Printer for Shipment
1.Turn the printer on and remove the following parts:
•All paper or other media
•Roll paper spindle
•Paper tray
Caution: To avoid spilling ink and damaging the printer, you must leave the cartridges in place, raise the ink levers, and lock the print head.
2.If you are using the 110 ml ink cartridges, leave them installed. If you are using 220 ml cartridges, remove them and install 110 ml cartridges.
To store partially used cartridges removed from the printer, tape over the needle valve hole and place each cartridge in a separate, resealable plastic bag. Be sure to remove the tape before reinstalling the cartridges. The printer must be powered on when removing or installing ink cartridges.
3.Raise the ink levers.