Setting Up the Printer 31

5.When you see a window asking you to turn on your printer, press the P Power button. (Make sure the printer is connected; see page 22.)

6.When you see a message that driver installation and printer configuration were completed successfully, click OK. The EPSON LFP Remote Panel begins installing.

7.Double-click Install Additional Color Profiles to install the profiles for your printer.

8.Double-click Install Reference Guide and wait while the guide is installed.

9.Do one of the following:

•If you are finished installing software, click Exit.

•If you installed the optional EpsonNet print server card, double-click InstallEpsonNet Config. Follow the on-screen instructions to install the software. You can use EpsonNet Config to configure your printer for network use.

10.Close the installer, then remove the CD-ROM. Go to the next section to update the printer firmware, if necessary.