Loadingi Rollll Paper

1Slide the black paper stop off the end of the spindle.

Note:To use paper with a 2-inch core, remove the gray adapters from the paper stops at each end. See your Printer Guide for details.

2Position the roll as shown, then slide it onto the spindle.

3Slide the black paper stop back onto the spindle and insert it firmly into the end of the roll.

4Open the roll paper cover.

5Place the roll paper in the printer as shown. (The black end of the spindle goes on the left.)

6Make sure the printer is turned on, then press the Paper Source button until the or icon appears.

7Release the paper lever.

8Hold both sides of the paper and feed it into the slot. Pull it all the way to the end of the paper tray.

9Using the end of the spindle, roll the paper until it is aligned with the mark next to the arrow. Then return the paper lever to the secured position.

Alignment mark

The printer automatically feeds the paper to the printing position.

10Raise the roll paper support on top of the paper tray. Then close the roll paper cover.

Caution:To prevent creasing the paper, remove it from the paper path and roll it up when you’re not printing.

1