Checkingi InkI Levelsls and Replacingl i InkI Cartridgesi
Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or you can wait until the ink runs out, replace the cartridge, and then continue the job without any loss of print quality.
Checking Ink Levels
The easiest way to check ink levels is from the control panel.
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
| Menu |
3sec. |
|
|
|
|
|
|
|
|
(full) |
|
|
|
|
|
|
| (empty) |
1 Matte Black/ |
|
|
|
|
|
|
| 8 Light Light Black |
Photo Black |
|
|
|
|
|
|
|
|
2 Cyan | 4 Yellow |
|
|
| 7 Light Magenta | |||
|
|
|
| 6 Light Cyan | ||||
3 Magenta | 5 Light Black | |||||||
Replacing Ink Cartridges
When the ink light flashes, one of the indicators is low, and INK LOW is displayed on the LCD panel, the corresponding cartridge is nearly empty. Make sure you have the correct replacement cartridge.
You can install any combination of 110 ml and 220 ml cartridges.
Epson UltraChromeK3TM ink
| 110 ml | 220 ml |
Photo Black | T564100 | T565100 |
Cyan | T564200 | T565200 |
Magenta | T564300 | T565300 |
Yellow | T564400 | T565400 |
Light Cyan | T564500 | T565500 |
Light Magenta | T564600 | T565600 |
Light Black | T564700 | T565700 |
Light Light Black | T564900 | T565900 |
Matte Black | T543800 | T544800 |
|
|
|
When one of the indicators shows empty and INK OUT is displayed on the LCD panel, the cartridge is empty. To replace the cartridge, first make sure the printer is on.
1Press the ink compartment cover to open it.
2Raise the ink lever to the unlocked position.
3Remove the empty ink cartridge from the printer.
Warning: Do not shake the empty cartridge, or ink may leak. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water.
4Make sure the replacement cartridge is the correct color, and remove it from its package.
Gently shake the cartridge before installing it.
Continue
5
▲