Epson PRO 4800 manual 33

Caution: Don’t turn off the printer while the firmware is updating.

Setting Up the Printer 33

6.Make sure your printer is on, its LCD is set to Ready, and it is connected to your computer, then choose Stylus Pro 4800 in the Printer list.

7.Click Browse and find the firmware that you just downloaded and extracted. Select the file and click Choose.

8.If the firmware version of the file is newer, click Update to start the firmware updating process. (If it is the same, you don’t need to update.)

9.When the update is complete, close the Firmware Updater window, LFP Remote window, and the Printer Utility window.

10.After updating your printer, you need to initialize the printer settings from the printer’s control panel. Press the Menu button. You see

PRINTER SETUP.

11.Press the button until you see INIT SETTINGS, then press

Menu .

12.Press Menu again. The settings are initialized and the printer returns to Ready status.