Tip: Creating a
Printing with Epson Drivers for Windows 89
The Roll Paper (Banner) setting allows you to print a series of continuous images without any margin space between them. This option is not available with all applications.
3.If you want to print without margins, click Borderless. Note that borderless printing takes longer than normal printing. See page 91 for more information about borderless printing.
Click Expansion. Choose Auto Expand or Retain Size, then click OK:
•Auto Expand enlarges your image (up to 3%) to fit the size of the paper. You can use the slider to adjust the expansion. Choose Min for the least amount of image expansion (with a chance that there will be small borders around the edges) or Max for the greatest amount of expansion (some of the image will be cut off around the edges, but it will extend to the edge of the paper).
•Retain Size prints your image at the size you specify in your application. You need to size it slightly wider than the paper width if you want to print without borders.
4.Choose one of the following Auto Cut settings:
•Off disables automatic cutting. Choose this setting if you want to operate the cutter manually, print multiple print jobs without cutting, or if you are printing on heavy media that must be cut by hand. See page 57 for instructions on operating the cutter manually.
•Single Cut causes the images to be printed
•Normal Cut allows margin space at the top and bottom of each image.
•Double Cut extends the space between images and trims each print individually. This provides the cleanest edge for borderless printing.
5.Select the size of your image as the paper size.