Epson R2000 - page 40

40 Maintaining Your Printer
9. Insert the new cartridge into the holder and push it down until it clicks into
place.
10. Once you replace all the necessary cartridges, close the cartridge cover and
push it down until it clicks into place.
11. Close the printer cover.
12. Press the Hink button to begin charging the ink. This takes about
21/2minutes. The Ppower light flashes as the ink charges. When the
Ppower light stops flashing and the Hink light goes out, ink charging is
finished.
Caution:
Never turn off the R2000 Series while ink is charging or you’ll waste ink.
If the Hink light is flashing, press the Hink button, then press down all the
cartridges securely.
If you remove a low or expended ink cartridge, you cannot reinstall and use the
cartridge.