Epson R240 Series manual 13

LCD Steps LCD Steps

4. Remove the new ink cartridge	7. Place the ink cartridge vertically
from the package.	into the cartridge holder. Then,
c Caution:	push the ink cartridge down until
	it clicks into place.
❏ Be careful not to break the hooks on the

side of the ink cartridge when you remove it from the package.

❏ Do not remove or tear the label on the cartridge; otherwise, ink will leak.

❏ Do not touch the green IC chip on the front of the cartridge. This can damage the ink cartridge.

8. When you have finished replacing the cartridge, close the cartridge cover and the printer cover.

❏Be sure to always install an ink cartridge

into the printer immediately following the removal of the current ink cartridge. If the ink cartridge is not installed promptly, the print head may dry out, rendering it unable to print.

5.Open the cartridge cover.

9. Press the x Start button. The print head will move and charging of the ink delivery system will begin.

When the ink charging process is finished, the print head will return to its home position.

6. Pinch the sides of the ink cartridge
that you want to replace. Lift the
cartridge out of the printer and
dispose of it properly. Do not take	c Caution:
the used cartridge apart or try to
refill it.	The P On button continues to flash while
	the printer performs the ink charging
	operation. Never turn off the printer while
	this light is flashing. Doing so can result in
	incomplete charging of ink.
	Note:
	If the ink end error occurs after the print
	head moves to its home position, the ink
	cartridge may not be installed properly.
	Press the y Stop/Clear button again, and
	reinstall the ink cartridge until it clicks into
	place.

Replacing Ink Cartridges 13